Transport | dh52-offset-disks Current Model |
---|---|
Width | 6.1 m 20 ft |
Ground clearance with base blades | 20.3 cm 8 in. |
Wheel hub bearings | Dual tapered roller bearings |
Height | |
Length | |
Working | |
Approximate working width | 5.8 m 19 ft |
Maximum penetration | 22.9 cm 9 in. |
Weight | |
Net | 5012.2 kg 11050 lb |
Weight per disk blade | 116.6 kg 257 lb |
Tractor requirements | |
Recommended PTO hp range | 149-175 kW 200-235 hp |
Recommended drawbar hp range | 126.8-149.1 kW 170-200 hp |
Frame | |
Type | Single offset rigid |
Duty | Medium |
Tube size | 15.2x15.2x0.95 cm 6x6x0.375 in. |
Hitch | |
Front hitch type | Spade |
Bolt-on rear hitch | |
Disk blades | |
Spacing | 26.7 cm 10.5 in. |
Quantity | 45 |
Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
Blade concavity | Standard: high Optional: low |
Available blade sizes | |
Blade option one | 660x7.9 mm 26x0.312 in. |
Blade option two | 711x7.9 mm 28x0.312 in. |
Blade option three | |
Blade option four | |
Blade option five | |
Blade option six | |
Disk gangs | |
Front angle | 2 Positions |
Rear angle | 2 Positions |
Furrow fillers | |
Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
Axle material | Round heat treated alloy steel threaded on both ends |
Bearing type | Oil Bbth tapered roller |
Bearing wear plates | Standard |
Bearing standards | Welded, Reinforced |
Scrapers | Adjustable |
Lighting and safety | |
Markings | SMV |
Safety tow chain | Yes |
Lights | Yes |
Tires | |
Type | Implement - Quantity of 4 |
Size | 12.5L x 15 10 ply in. |
Wheel hub type | 8 Bolt |
Set-up time | |
Warranty | |
Key Specs | |
Approximate working width | |
Disk blades | |
Frame | |
Notched (front) Notched (rear) | |
Recommended drawbar hp range | |
Transport - Width |