| Transport | dh52-offset-disks Current Model |
|---|---|
| Width | 6.1 m 20 ft |
| Ground clearance with base blades | 20.3 cm 8 in. |
| Wheel hub bearings | Dual tapered roller bearings |
| Height | |
| Length | |
| Working | |
| Approximate working width | 5.8 m 19 ft |
| Maximum penetration | 22.9 cm 9 in. |
| Weight | |
| Net | 5012.2 kg 11050 lb |
| Weight per disk blade | 116.6 kg 257 lb |
| Tractor requirements | |
| Recommended PTO hp range | 149-175 kW 200-235 hp |
| Recommended drawbar hp range | 126.8-149.1 kW 170-200 hp |
| Frame | |
| Type | Single offset rigid |
| Duty | Medium |
| Tube size | 15.2x15.2x0.95 cm 6x6x0.375 in. |
| Hitch | |
| Front hitch type | Spade |
| Bolt-on rear hitch | |
| Disk blades | |
| Spacing | 26.7 cm 10.5 in. |
| Quantity | 45 |
| Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
| Blade concavity | Standard: high Optional: low |
| Available blade sizes | |
| Blade option one | 660x7.9 mm 26x0.312 in. |
| Blade option two | 711x7.9 mm 28x0.312 in. |
| Blade option three | |
| Blade option four | |
| Blade option five | |
| Blade option six | |
| Disk gangs | |
| Front angle | 2 Positions |
| Rear angle | 2 Positions |
| Furrow fillers | |
| Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
| Axle material | Round heat treated alloy steel threaded on both ends |
| Bearing type | Oil Bbth tapered roller |
| Bearing wear plates | Standard |
| Bearing standards | Welded, Reinforced |
| Scrapers | Adjustable |
| Lighting and safety | |
| Markings | SMV |
| Safety tow chain | Yes |
| Lights | Yes |
| Tires | |
| Type | Implement - Quantity of 4 |
| Size | 12.5L x 15 10 ply in. |
| Wheel hub type | 8 Bolt |
| Set-up time | |
| Warranty | |
| Key Specs | |
| Approximate working width | |
| Disk blades | |
| Frame | |
| Notched (front) Notched (rear) | |
| Recommended drawbar hp range | |
| Transport - Width |
© COPYRIGHT 2024 WEST CENTRAL EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By
