| Transport | dh56-offset-disks Current Model |
|---|---|
| Width | 3.4 m 11 ft |
| Ground clearance with base blades | |
| Wheel hub bearings | Dual tapered roller bearings |
| Height | |
| Length | |
| Working | |
| Approximate working width | 3 m 10 ft |
| Maximum penetration | |
| Weight | |
| Net | 6,304.9 kg 13,900 lb |
| Weight per disk blade | 393.7 kg 868 lb |
| Tractor requirements | |
| Recommended PTO hp range | |
| Recommended drawbar hp range | 167.8 kW 225+ hp |
| Frame | |
| Type | Single offset rigid |
| Duty | Heavy |
| Tube size | 20.3x20.3x1.3 cm 8x8x0.5 in. |
| Hitch | |
| Front hitch type | Pintle |
| Bolt-on rear hitch | |
| Disk blades | |
| Spacing | 43.2 cm 17 in. |
| Quantity | 16 |
| Type | Notched (front) Notched (rear) Standard |
| Blade concavity | |
| Available blade sizes | |
| Blade option one | 914x12.7 mm 36x0.5 in. |
| Blade option two | |
| Blade option three | |
| Blade option four | |
| Blade option five | |
| Blade option six | |
| Disk gangs | |
| Front angle | 3 positions |
| Rear angle | 3 positions |
| Furrow fillers | |
| Axle size | 6.4 cm 2.5 in. |
| Axle material | Round heat treated alloy steel threaded on both ends |
| Bearing type | Oil bath tapered roller |
| Bearing wear plates | Standard |
| Bearing standards | Welded, reinforced |
| Scrapers | Adjustable |
| Lighting and safety | |
| Markings | SMV |
| Safety tow chain | Yes |
| Lights | Yes |
| Tires | |
| Type | 2 - Radial Industrial |
| Size | 385/65R22.5 |
| Wheel hub type | 5-spoke Dayton hubs |
| Set-up time | |
| Warranty | |
| Key Specs | |
| Approximate working width | |
| Disk blades | |
| Frame | |
| Notched (front) Notched (rear) | |
| Recommended drawbar hp range | |
| Transport - Width |
© COPYRIGHT 2024 WEST CENTRAL EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By
